Replacing A Monitoring Board - Huawei PDU8000 Series User Manual

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Fuse
1FU14/2FU14
1FU15/2FU15
Procedure
Step 1 Shake the fuse terminal block slightly and remove it, as shown by (1) in
Step 2 Push out the fuse terminal block, as shown by (2) in
Figure 8-13 Removing the fuse terminal block
Step 3 Extract the blown fuse and install a new fuse.
Step 4 Reinstall the fuse terminal block in the PDC.
----End

8.5.5 Replacing a Monitoring Board

Context


Issue 02 (2016-11-10)
Specifications
Fuse of phase L2 of monitoring board 3 or fuse of phase L2 of
monitoring board 6
Fuse of phase L1 of monitoring board 3 or fuse of phase L3 of
monitoring board 6
The preceding tables use a fully configured PDC as an example. The actual cabinet configurations
prevail.
Tool: Phillips screwdriver
Materials: new monitoring board
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance Guide
Figure
Figure 8-13.
8-13.
137