Huawei PDU8000 Series User Manual page 146

PDU8000 Modular Precision Power Distribution Cabinet
User Manual
Procedure
Step 1 Open the front door of the PDC, turn off the input and output switches in the PDC, and turn
off the upstream and downstream switches.
Step 2 Remove the screws from the SPD panel and three output module panels, and set the screws
aside, as shown in
Figure 8-15 Removing the panel
Step 3 Remove cables connected to the top and bottom of the SPD.
Step 4 Remove the SPD mounting panel.
Issue 02 (2016-11-10)
 Replacement order: from the top down.

The following procedure describes how to replace the third output module of a fully configured
(three output modules) PDC. The procedures for replacing the first and second modules are similar.

The figures are for reference only. The actual product appearance prevails.
Figure 8-15.
Group the removed screws by type to ensure correct reinstallation later.
When removing cables, label the cables with corresponding terminal ports for later connection.
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance Guide
139