This Manual - ABB ABILITY SSC600 Operation Manual

Introduction
1.3.1

This manual

The operation manual contains instructions on how to operate the IED once it has been
commissioned. The manual provides instructions for monitoring, controlling and setting
the IED. The manual also describes how to identify disturbances and how to view
calculated and measured power grid data to determine the cause of a fault.
Intended audience
This manual addresses the operator, who operates the IED on a daily basis.
The operator must be trained in and have a basic knowledge of how to operate protection
equipment. The manual contains terms and expressions commonly used to describe this
kind of equipment.
Document conventions
• Abbreviations and acronyms in this manual are spelled out in the glossary. The
glossary also contains definitions of important terms.
• WHMI menu paths are presented in bold typeface.
Select Main menu > Settings.
• WHMI menu names are presented in bold typeface.
Click Information in the WHMI menu structure.
• Parameter names are shown in
The function can be enabled and disabled with the
• Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
• IED input/output messages and monitored data names are shown in Courier font.
When the function starts, the START output is set to TRUE.
Symbols
12
Note: Product series- and product-specific manuals can be downloaded from
http://www.abb.com/relion
the ABB Web site
Note: A particular convention may not be used in this manual.
Warning: The warning icon indicates the presence of a hazard which could
result in electrical shock or other personal injury.
Caution: The caution icon indicates important information or warning related
to the concept discussed in the text. It might indicate the presence of a hazard
which could result in corruption of software or damage to equipment or
property.
italics .
Operation setting.
1MRS758850
SSC600
Operation Manual