Monitoring Fault Records - ABB ABILITY SSC600 Operation Manual

IED operation
Creating disturbance recordings
Normally disturbance recordings are triggered by the IED applications but the recording
can also be triggered manually.
1.
2.
Monitoring disturbance recorder data
You can view the disturbance recordings from the IED.
1.
2.
Controlling and reading of disturbance recorder data
Disturbance recorder data can be controlled and read with PCM600. It can also be read
via WHMI.
IED self-supervision
The IED self-supervision handles internal run-time fault situations. The main indication of
an internal fault is a flashing green Ready LED.
Internal faults can be divided to hardware errors, run-time errors in the application or
operating system and communication errors. Further actions always depend on the cause
of the error.
The IED records system registrations, IED status data and events.
46
Click Disturbance records in the View bar.
Click Manual trigger
Select Disturbance records in the View bar.
The following items are listed in the view:
• Number of recordings currently in the IED's memory.
• Remaining amount of recordings that fit into the available recording memory.
• Recording memory used in percentage.
• If the periodic triggering function is used, the time to trigger which indicates the
remaining time to the next periodic triggering of the disturbance recorder.
You can delete an individual disturbance record by selecting Delete
can delete all disturbance records from the IED's memory by selecting Delete All
.
Note: For more information, see PCM600 documentation.
Note: Only authorized and skilled personnel should analyze the errors and
decide on further actions.
Note: Document all the recorded data from the IED before resetting the
tripping and lockout functions.
to create disturbace recondings manually.
1MRS758850
. You
SSC600
Operation Manual