Showing Parameters; Editing Values - ABB ABILITY SSC600 Operation Manual

IED operation
4.1.4

Showing parameters

Some function blocks have a function-specific On/Off setting. When the function setting is
"Off", all settings are hidden and when the function setting is "On", all settings are visible
based on the other visibility and hiding rules.
Switch the function setting by changing the value of the Operation parameter ON or OFF.
Figure 11. Function block On
Figure 12. Function block Off
4.1.5

Editing values

1.
2.
3.
4.
5.
34
Select a menu in the menu navigation bar.
Click a submenu to see function blocks.
Click a function block to see the setting values.
Click Enable Write
The selected setting group is shown in the Setting Group drop-down list. The active
setting group is indicated with an asterisk *.
Edit the value.
• The minimum, maximum and step values for a parameter are shown in the Min.,
Max. and Step columns.
.
1MRS758850
SSC600
Operation Manual