IED operation
4.3
IED parametrization
IED parameters are set via the WHMI or PCM600.
Setting parameters need to be calculated according to the electrical network conditions
and the electrical characteristics of the protected equipment. The settings need to be
verified before the IED is connected to a system.
4.3.1
Settings for IED functionality
Function settings can be edited one by one by navigating to the individual setting values.
The values in other setting groups should be known before editing a certain setting value.
After completing the editing of setting group values, the new values are activated. The
user can either commit the edited values or discard them. Setting values can also be
copied from one setting group to another.
4.3.2
Settings for different operating conditions
IED settings can be designed for various operation conditions by defining different setting
values to different setting groups. The active setting group can be changed by the IED
application or manually via the WHMI or PCM600.
4.3.3
Activating programmable virtual LEDs
1.
2.
3.
4.
5.
44
Note: Document all changes to parameter settings.
Note: For more information, see PCM600 documentation.
Select Main menu > Configuration > Programmable LEDs.
Select General to set the alarm color for the programmable LEDs.
Enable parameter editing by selecting Enable Write
Select Write to IED
Select LED 1 ... LED 100 to define the alarm mode and description for each
programmable LED.
to save changes into the IED's memory.
1MRS758850
.
SSC600
Operation Manual