Siemens SINUMERIK Series Operating Manual page 242

Machining the workpiece
6.12 Display and edit user variables
There are no gaps in the numbering within the range.
Procedure
Display comments
Delete R variables
242
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. Select the "Parameter" operating area.
2. Press the "User variable" softkey.
3. Press the "R variables" softkey.
The "R parameters" window appears.
1. Press the ">>" and "Display comments" softkeys.
The "R parameters with comments " window opens.
2. Press the "Display comments" softkey once again to return to the "R pa‐
rameters" window.
1. Press the ">>" and "Delete" softkeys.
The "Delete R parameters" window appears.
2. In fields "from R parameters" and "to R parameters", select the R param‐
eters whose values you wish to delete.
- OR -
Press the "Delete all" softkey.
3. Activate the checkbox "also delete comments" if the associated com‐
ments should also be automatically deleted.
4. Press the "OK" softkey.
● A value of 0 is assigned to the selected R parameters or to all R
parameters.
● The selected comments are also deleted.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling