Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
Parameter
Description
ZD
- (only for ∇ machining)
- (only for blank description, cylinder and allowance)
● For blank description, cylinder
● For blank description, allowance
Allowance
Allowance for pre-finishing - (only for ∇∇∇)
● Yes
● No
U1
Compensation allowance in X and Z direction (inc) – (only for allowance)
● Positive value: Compensation allowance is kept
● Negative value: Compensation allowance is removed in addition to finishing
* Unit of feedrate as programmed before the cycle call
Hidden parameters
The following parameters are hidden. They are pre-assigned fixed values or values that can
be adjusted using setting data.
Parameter
Description
Residual material
Without subsequent residual material removal
PL
Machining plane
SC
Safety clearance
DI
Continuous cut - (only for ∇)
Set machining area
Set machining area limits
limits
N
Number of grooves
626
–
Version, absolute:
Cylinder dimension (abs)
–
Version incremental:
Allowance (inc) to maximum values of the CYCLE62 finished part contour
–
Allowance on the CYCLE62 finished part contour (inc)
U1 contour allowance
allowance
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Value
Can be set in SD
No
Defined in MD
52005
1 mm
0
No
1
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Unit
mm
mm
mm
x
Milling