Siemens SINUMERIK Series Operating Manual page 639

G code program parameters
PL Machining plane
Parameter Description
TC Name of the swivel data record
Retraction No
ZR Retraction path - (only for incremental retraction in the tool direction)
Swivel plane
● New: New swivel plane
● Additive: Additive swivel plane
X0 Reference point for rotation X
Y0 Reference point for rotation Y
Z0 Reference point for rotation Z
Swivel mode
● Axis by axis: Rotate coordinate system axis-by-axis
● Solid angle: Swivel via solid angle
● Proj. angle: Swiveling via projection angle
● Direct: Directly position rotary axes
Axis sequence Sequence of the axes which are rotated around: - (only for axis-by-axis swivel mode)
XYZ or XZY or YXZ or YZX or ZXY or ZYX
X Rotation around X
Y Rotation around Y
Z Rotation around Z
Projection position Position of the projection in space - (only for swivel mode, projection angle)
Xα, Yα, Zβ or Yα, Zα, Zβ or Zα, Xα, Zβ
Xα Projection angle
Yα Projection angle
Zβ Angle of rotation in the
plane
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
ShopMill program parameters
T
D
F
S / V
No retraction before swiveling
Incremental retraction in tool direction
The retraction path is entered into parameter ZR.
Maximum retraction in tool direction
Retraction in the direction of machine axis Z
Retract towards the machine axis Z and then in the direction
X, Y
- (only for axis sequence)
- (only for projection position)
Programming technological functions (cycles)
10.6 Further cycles and functions
Tool name
Cutting edge number
Feedrate
Spindle speed or constant cutting
rate
mm/min
mm/rev
rpm
m/min
Unit
Degrees
Degrees
Degrees
Degrees
Degrees
Degrees
639