T,F,S Window - Siemens SINUMERIK Series Operating Manual

Display
Collision monitoring
(only 840D sl)
Footer
See also
Overview (Page 113)
Zero offsets (Page 145)
2.4.4

T,F,S window

The most important data concerning the current tool, the feedrate (path feed or axis feed in
JOG) and the spindle is displayed in the T, F, S window.
In addition to the "T, F, S" window name, the following information is also displayed:
Display
BC (example)
Turning (example)
Tool data
Display
T
Tool name
Location
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Meaning
Collision avoidance is activated for the JOG and MDA or
AUTOMATIC modes.
Note:
The $MN_JOG_MODE_MASK machine data can be set
to suppress the display of the symbol.
Please refer to the machine manufacturer's specifications.
Collision avoidance is deactivated for the JOG and MDA
or AUTOMATIC modes.
Display of active work offsets and transformations.
The T, F, S values are also displayed in the full-screen version.
Meaning
Name of the tool carrier
Name of the active kinematic transformation
Active tool carrier rotated in the plane
Active tool carrier swiveled in space
Meaning
Name of the current tool
Location number of the current tool
Introduction
2.4 User interface
45