Siemens SINUMERIK 840D sl Commissioning Manual page 129

Proceed as follows
...
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
1. Select the "Diagnosis" operating area.
2. Press the menu forward key.
New horizontal softkeys are displayed.
3. Press the "Axis diagn." softkey.
The "Service overview" window opens.
4. Press the "Service axis" softkey.
The "Service Axis/Spindle" window opens.
5. Press the "Axis +" or "Axis -" softkey.
The values of the next (+) and the previous (-) axes are displayed.
- OR -
Press the "Axis selection" softkey.
The "Direct selection" window opens.
6. Select the required axis directly from those available in the drop-down
list box.
Service and diagnostics
13.2 Displaying the service overview
123