Siemens SINUMERIK 840D sl Commissioning Manual page 87

Create your own texts and define their properties in the <Message> tag.
Entries
Source
Translation
chars
lines
remark
Proceed as follows
1. Open the /Siemens/sinumerik/hmi/lng folder.
2. Copy the "oem_sltmlistdialog_deu.ts" file.
3. Paste the copy of the file into the following directory: /OEM/sinumerik/hmi/lng or
4. Change the file name to "sltmlistdialog_deu.ts". For the other languages, change the file
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
/User/sinumerik/hmi/lng
name according to the list in "Language-specific files".
Meaning
New text identifier
See 1st example: single-line text with new text identifier
"MY_NEW_TEXT".
See 2nd example: two-line text with new text identifier
"MY_NEW_TEXT_2_LINES".
New text
Single-line or multi-line text can be entered. "%n" is used to indicate a
line break.
See 1st example: single-line text "My new text" appears on the user
interface.
See 2nd example: two-line text "My new - text" appears on the user
interface.
New text length
See 1st example: Text length of 30 characters is specified.
See 2nd example: Text length of 10 characters per line is specified.
Number of rows
See 2nd example: The number of rows is 2.
Own comment that is not displayed.
Configuring tool management
9.9 Creating In-House Texts
81