Siemens SINUMERIK 840D sl Commissioning Manual page 41

$MM_ACTIVATE_FRAME_CHANGES_AT_ONCE =1
Description:
Range of values: 0 - 1
Default:
Effective:
$MM_AXES_SHOW_GEO_FIRST= 1
Description:
Range of values: 0 - 1
Default:
Effective:
$MM_BLOCK_SEARCH_MODE_MASK=0x33
Description:
Range of values: 0 – 0xFF
Default:
Effective:
$MM_COORDINATE_SYSTEM=0
Description:
Range of values: 0 - 1
Default:
Effective:
$MM_MAX_SKP_LEVEL=1
Description:
Range of values: 1 - 10
Default:
Effective:
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
Changes to a user or base frame are applied on the next block change,
even if they have already been selected.
1
Restart
Geometry axes are always output at the top of lists.
1
Restart
Use a bit mask to determine the possible selection for the block search
mode.
0x01, Search mode end of block
0x02, Search mode contour
0x10, Search mode without calculation in the main program
0x20, Search mode SERUPRO test run
0x33
Restart
Show actual values SZS coordinate system.
0
Restart
Specify how many skip levels can be selected.
1
Restart
Machine and setting data
5.1 Overview
35