Prerequisites; Hardware/Software; Limitations - Siemens SINUMERIK 840D sl Commissioning Manual

Prerequisites

2.1

Hardware/Software

It is a requirement that all system components be fully mounted, installed and configured.
The start-up of NC and PLC should be essentially completed. The PLC is in the "Run"
condition.
● USB keyboard: handles text input with capital and lower-case letters.
● Storage medium, e.g. USB FlashDrive and/or network connection: handles data
● TextPad text editor: handles external creation and editing of XML and ini files in
● WinSCP: enables protected data transfer between different computers. You can get the
2.2

Limitations

With HMI sl, the tool management only supports "milling" technology.
HMI sl (IM9)
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
exchange with an external PC/PG.
Windows. For further information please visit us on the Internet at:
http://www.textpad.com/
program on the Internet at:
http://winscp.net/eng/docs/lang:de
2
13