Prerequisites - Siemens SICHARGE UC Installation And Commissioning Manual

Prerequisites

Configuration Table
Bender Iso Monitor instruction and setting (Final Setting R1 = 100 R2 = 95, Delay Time
(Response delay ton=30s) )
Hardware Tools
• Electrician Tool
• Voltmeter 1000V
• Torque Wrench
• Insulation meter
Find a more detailed list in the following link
(https://siemens.sharepoint.com/teams/eMobilityServiceCollaboration/SitePages/tool-kit-
list.aspx?csf=1&web=1&e=KuIGua&cid=8d05975c-5587-4130-9a8b-a013ec966890)
Software Tools
For the correct configuration and update of the charging devices and their subsystems, be
sure to have the following software with you:
• TIA Portal V15 DVD1 (https://support.industry.siemens.com/cs/ww/en/view/109752566)
• Updates for STEP 7 V15 and WinCC V15
(https://support.industry.siemens.com/cs/ww/en/view/109752566)
• HSP for TIA Portal
• MobaXterm
• balenaEtcher
• Wireshark
Installation and Commissioning Checklist for SICHARGE UC
Product Information, 03/2023, A5E52548271-AA
2
5