Siemens SICHARGE UC Installation And Commissioning Manual page 63

SICHARGE UC MastPanto
6.2 Installation
No.
3 Place a piece of wood or similar under the base of the mast
4 Lift it carefully until the SICHARGE UC MastPanto hangs vertically from the sling gear
① Attachment point crane
② Attachment points mast base
③ Transport supports
④ Transport lock of the cantilever arm
Figure 6-6
Mounting the SICHARGE UC MastPanto
No.
1 Remove the bottom panels on the front and rear
2 Remove the orange strip prior moving the SICHARGE UC MastPanto
3 Transport the SICHARGE UC MastPanto to the base area
4 Position the SICHARGE UC MastPanto over the threaded rods on the base area
5 Guide any underground cables into the mounting base of the SICHARGE UC MastPanto
62
Checklist item
Attachment points
Checklist item
⑤ Mast
⑥ Cantilever arm
⑦ Screw of the cantilever arm serves as pivot
point
⑧ Attachment points connecting rod mounting
points
Installation and Commissioning Checklist for SICHARGE
UC Product Information, 03/2023, A5E52548271-AA
P F N/A
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐