Siemens SICHARGE UC Installation And Commissioning Manual page 73

SICHARGE UC MastPanto
6.3 Connection
Connection of the Ethernet cable
No.
1 Route the communication cable to the Siemens controller
2 Plug the RJ45 plug of the communication cable into the "SW_ETH0" Ethernet socket of the Siemens
controller
Note
Follow the instructions of the connector manufacturer to assemble the Industrial Ethernet
connector
Connection of the fiber-optic cables
No.
1 Route the fiber-optic cable to the fiber-optic cable converter
2 Insert the SC duplex plug (1300 nm) of the fiber-optic cable into the "X2" connection socket of the
fiber-optic cable converter
Note
Follow the instructions of the connector manufacturer to assemble the connector of the
fiber-optic cable
Installing the panels
Mast panels
No.
1 Install the mast panels to the MastPanto
2 Tighten the Torx security screws
Cantilever arm panels
No.
1 Install the cantilever arm panels on the MastPanto
2 Use an anti-seize lubricant, for example Loctite LB 84014 on the thread of the Allen screws
3 Tighten the Allen screws
72
Checklist item
Checklist item
Checklist item
Checklist item
Installation and Commissioning Checklist for SICHARGE
UC Product Information, 03/2023, A5E52548271-AA
P F N/A
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐