NEC DS1000 Correspondence Course Workbook page 138

DS1000/2000 Correspondence Course
System Programming
Program 1801 - Extension Port Description
138 DS1000/2000 Workbook
Use this program to set up some of the various options for
extensions.
1. Enter the programming mode.
2. 1801 +
HOLD
1801:EXTENSION PROG
STATION #?
3. Enter the number of the station number you want to program (300-395) +
HOLD
OR
Press to select extension 300.
HOLD
1801: STATION #nnn
PT TYPE?n
The previously programmed value displays. Not all circuit types
may be available in the DS1000. Valid circuit types are:
00 = Uninstalled, 01 = 22-Button Standard, 02 = 22-Button Dis-
play, 06 = 34-Button Display, 09 = 34-Button Super Display, 10 =
Door Box, 11 = ESL, 15 = Analog station, 21 = 2OPX (1st port),
22 = 2OPX (2nd port - view only), 31 = VAU Module, 32 = VAU
Expansion Module, 35 = 3DCI Unit, 36 = 3ACI Unit
4. Enter the software port (for 3DCI, 3ACI, VAU and VAU Expansion Modules
only) + .
VOL
OR
Press to leave the current entry unchanged.
VOL
1801: STATION #nnn
EXT:nnn
The previously programmed value displays. Not all circuit types
may be available in the DS1000. Valid circuit types are:
00 = Uninstalled, 01 = 22-Button Standard, 02 = 22-Button Dis-
play, 06 = 34-Button Display, 09 = 34-Button Super Display, 10 =
Door Box, 11 = ESL, 15 = Analog station, 21 = 2OPX (1st port),
22 = 2OPX (2nd port - view only), 31 = VAU Module, 32 = VAU
Expansion Module, 35 = 3DCI Unit, 36 = 3ACI Unit
5. Enter the new station circuit type +
OR
Press to leave the current circuit type unchanged
VOL
To scroll through the available entries instead of entering a code in this step:
1. Press ICM (your ICM key flashes fast).
2. Press VOL OR VOL
3. Press HOLD to assign the displayed entry to the key.
You automatically advance to the next prompt.
1801: STATION #nnn
DCI TYP?n
twice.
VOL
until the entry you want displays.
NEC America