NEC DS1000 Correspondence Course Workbook page 169

Step 11: Should extension have access to a Message Center?
NEC America
DS1000/2000 Correspondence Course
Step-by-step guide for setting up Voice Mail
If yes
If no
If you have a system available for your use, continue with the following section,
after you . . .
Complete Questions 31-40
in the Answerbook
System Programming
(Sheet 4 of 4)
• If you want the Message Center key on the keyset:
In Program 1701 - Programmable Function Key
Assignment, assign a keyset programmable key as a
Message Center key (code 24). The Message Center
can be an installed or uninstalled extension, but must
be in the system's number plan (e.g., 300-379 in U
Slot).
• If you want the Message Center key on the DSS
Console:
In Program 1704 - DSS Console Key Assignment,
assign a DSS Console key as a Message Center
key (code 24). You must also enter the Message
Center mailbox number. The Message Center can
be an installed or uninstalled extension, but must
be in the system's number plan (e.g., 300-379 in
U Slot).
• In Program 1701 - Programmable Function Key
Assignment, make sure a keyset key is not
assigned as a Message Center key (code 24).
• In Program 1704 - DSS Console Key Assignment,
make sure a DSS Console key is not assigned as a
Message Center key (code 22).
DS1000/2000 Workbook 169