9.4
G33, CBE20 Communication Board
Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Connection Modules
● Active Line Connection Modules
● Motor Modules
Description
Figure 9-3
Interface module CBE20 is used for communication via PROFINET.
The module is installed in the factory in the option slot of the CU320-2 Control Unit.
Four Ethernet interfaces are available on the module. Diagnosis of the function mode and
communication are possible via LEDs.
Cabinet Modules liquid cooled
Manual, 10/2015, A5E37067587A
CBE20 Communication Board Ethernet
9.4 G33, CBE20 Communication Board
Options
287