Inserting an infeed unit
You insert an infeed unit via the hardware catalog
1. Open "Line Modules" in the hardware catalog.
Active Line Modules, Basic Line Modules and Smart Line Modules can be selected.
2. Select the unspecified infeed unit in the hardware catalog.
Figure 4-8
3. Drag the unspecified infeed unit into the device view.
Figure 4-9
Generally, the DRIVE-CLiQ connection is automatically established. The unspecified
infeed unit must now be specified in more detail.
Commissioning with Startdrive
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Selecting an infeed unit
Infeed unit inserted
Commissioning
4.3 Creating a project
65