Commissioning
4.3 Creating a project
4.3.8.2
Adding a Terminal Board
Requirement
You have already inserted a Control Unit.
Adding a Terminal Board
The TB30 Terminal Board allows you to expand the interfaces of the Control Unit (CU). The
Terminal Board is inserted into the option slot of the Control Unit. The Terminal Board does
not have to be specified any further.
1. Open "Additional system components > Terminal Boards" in the hardware catalog.
"Terminal Board TB30" is displayed.
2. Select the unspecified Terminal Board TB30 in the device overview.
3. Drag the unspecified Terminal Board into the device view.
88
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive