Toro ProPass 200 Operator's Manual page 24

Button
Turning On the Handheld Remote
Press the O /O button on the remote and wait for the it to
N FF
find the base. Ensure that there are no buttons being pressed
on the hand held while it is performing its start up routine.
Manual Override
Should the remote ever be lost, damaged or fail, the machine
functions and operation are still possible in order to complete
tasks or continue work.
The override access is on the driver side of the hydraulic
system (Figure 43).
Name Primary Function
F I Increases the Floor speed.
LOOR NC
P 1 Three separate preset values may be stored for both floor and option speeds.
RESET
P 2
RESET
P 3
RESET
Used in conjunction with the P
S
TORE
memory.
O S Provides functional control of the rear option including on/off and displaying
PTION TART
the option speed.
O S Stops the option.
PTION TOP
O D Decreases the option speed.
PTION EC
O I Increases the option speed.
PTION NC
A S Stops both floor and option.
LL TOP
24
button to store or establish a preset
RESET
Figure 43
1. Floor speed
•
To adjust the floor speed
clockwise. Maximum floor speed is used in the
Color-Coded Operating System so this adjustment can be
made while no hydraulic flow is present. This is most
relevant when you have a hopper full of sand.
2. Spinner speed
(Figure 44), turn the knob