Mitsubishi Electric MELSEC-F FX3G Series User Manual page 49

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
3.2.4 The accessing path to the FX
The FX connected to the FX
3G
16CCL-M) and Q CPU (Q mode) master/local station when GX Works2 is used.
Accessing permits read, write, verify, device batch monitoring and device test.
The communication path of CC-Link is illustrated as follows.
1) The path when accessing from the FX
PC
(GX Works2)
2) The path when accessing from the master QCPU (Q mode) station
PC
GX Works2
etc.
3) The path when accessing from a local QCPU (Q mode) station
PC
GX Works2
etc.
*1
(Q mode)
*1. Direct connection or connection using the GOT transparent mode.
from CC-Link
3G
-64CCL can be accessed via CC-Link from the FX master station (FX
3U
→ For details, refer to the manual of GX Works2 or GX Developer
3U
*1
FX
3G
main unit
CC-Link
FX
main unit
Q
QCPU
master
*1
(Q mode)
station
CC-Link
FX
3G
FX -64CCL
3U
main unit
QCPU
master
(Q mode)
station
CC-Link
FX
3G
Q
QCPU
main unit
local
station
3.2 Connector Types and Cables for Program Communication
-16CCL-M
FX -16CCL-M
3U
3G
FX -64CCL
3U
Q
FX -64CCL
3U
3 Introduction of Products
-
3U
43
1
2
3
4
5
6
7
8
9
10