Mitsubishi Electric MELSEC iQ-R Series User Manual page 110

Recording setting information area (Un\G3200 to 3999)
Setting information of recording settings can be checked.
Buffer memory name
Recording setting
*1
information 1
Recording setting information 2 to 4
*1 A value is updated when the operating status switches to 'operating.'
*2 Enabled only when specifying a recording startup trigger.
*3 Enabled only when specifying a recording startup trigger and selecting the checkbox of "Save after specified time elapses from
recording completion."
*4 A set condition and a bit in the buffer memory are linked by a condition number as follows:
Recording setting No.1: Un\G3209
Recording setting No.2: Un\G3309
Recording setting No.3: Un\G3409
Recording setting No.4: Un\G3509
6 RECORDER MODULE (DETAILED SPECIFICATIONS)
108
6.4 Buffer Memory
Address
Recording buffer size Un\G3200
Saving period Un\G3201 to 3202
Saving setting when there is Un\G3203
no free folder number
Recording startup trigger Un\G3204
specification
Recording startup trigger Un\G3205
*2
establishment condition
Saving specification after the Un\G3206
specified time has elapsed
*2
from recording completion
Waiting time from recording Un\G3207 to 3208
*3
completion to file saving
Establishment condition of Un\G3209
*4
file saving trigger
*1
Un\G3300 to 3599
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
16 15 14 13 12 11 10 9
16 15 14 13 12 11 10 9
16 15 14 13 12 11 10 9
16 15 14 13 12 11 10 9
Description
The recording buffer capacity set in the module parameter is stored.
(unit: MB)
The saving period set in the recording setting is stored.
(unit: s)
■When selecting "File Saving Trigger Only" for the recording method
Total saving period before and after trigger
■When selecting "Recording Startup Trigger + File Saving Trigger" for the
recording method
Accumulation period
A saving setting when there is no free folder number set in the recording
setting is stored.
0: Overwrite
1: Not save
A recording startup trigger specification set in the recording setting is stored.
0: Not specify (when selecting "File Saving Trigger Only" for the recording
method)
1: Specify (when selecting "Recording Startup Trigger + File Saving Trigger"
for the recording method)
The condition to satisfy a recording startup trigger set in the recording setting
is stored in b0.
OFF: Rising
ON: Falling
The saving specification after the specified time has elapsed from recording
completion set in the recording setting is stored.
0: Not specify
1: Specify
The waiting time from recording completion to file saving set in the recording
setting is stored.
(unit: s)
The condition to satisfy a file saving trigger set in the recording setting is
stored.
OFF: Rising
ON: Falling
Details are the same as recording setting information 1.
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1