Event Code List - Mitsubishi Electric MELSEC iQ-R Series User Manual

Event code list

The following shows the event code list of a recorder module.
Event code Event type
20400 Operation
20401 Operation
24020 Operation
24021 Operation
24030 Operation
24031 Operation
24040 Operation
24044 Operation
2A010 Operation
2A030 Operation
2A032 Operation
Overview
Firmware update succeeded(Recorder module)
Firmware update failed(Recorder module)
Recording Operation Start
Recording Operation Stop
File Saving Trigger Establishment
Recording Files Saving Completion
Error Clear
INFO LED Off
SD Memory Card Initialization
Recording Files Saving Completion
Recording Files Saving Completion
Cause
The firmware of the Recorder module was
successfully updated.
The firmware update of the Recorder module failed.
The recording operation has been started.
The recording operation has been stopped.
The file saving trigger has been established.
Saving the recording files has been completed.
Errors have been cleared.
INFO LED has been turned off.
The SD memory card has been initialized.
• Saving the recording files has been completed.
• Failed to save the event history file.
• Saving the recording files has been completed.
• The sampled device and label data have exceeded
the size that can be stored in the recording buffer.
• Please set a sufficient size for the recording buffer
in the basic settings of the module parameter.
• Please set a shorter saving period before and after
the file saving trigger or saving period after the
recording startup trigger in the saving period
setting of the recording setting.
• Please reduce some device and label data to be
stored in the Device/Label collection target setting
of the recording settings.
5 TROUBLESHOOTING
5.5 Recorder Module
5
87