Chapter 4 Recording Monitor - Mitsubishi Electric MELSEC iQ-R Series User Manual

4
RECORDING MONITOR
This chapter shows the "Recording Monitor" screen of GX Works3 for checking the status of the recording function.
Window
Select [Diagnostics]  [Recording Monitor].
Displayed items
Item
(1) Monitoring status
[Start Monitoring]/[Stop Monitoring] button
Recording Status
Start/Stop Operation
File saving
*1 The progress rate (%) is also displayed when "Saving" is displayed.
*2 If data is cleared, "No Error" is displayed.
For the condition for clearing data, refer to the following:
(1)
Status
Error (Latest)
*3,*4
Saving Period [s]
Maximum Saving Period (Estimate)
*3,*4
[s]
Detail
*5
[Start] button
*6
[Stop] button
*6
[Execution] button
Description
The monitoring status is displayed.
Click this to start or stop monitoring.
The operating status of the recording function is displayed.
Page 40 Operating status
An error is displayed for each recording setting.
If no error occurs, "No Error" is displayed.
If an error occurs, the latest error code is displayed.
The error description and corrective action can be checked in the module
diagnostics of a recorder module in which an error occurred.
A saving period set in the recording setting is displayed.
A standard for a saving period during which data can be accumulated in the
recording buffer is displayed. It is calculated based on the cumulative size
(average) and the sampling interval (average).
The cumulative size (average) and the sampling interval (average) can be
checked in the "Recording Status Detailed Information" screen.
Page 67 Recording Status Detailed Information Screen
Click a cell in the "Detail" column to open the "Recording Status Detailed
Information" screen.
Page 67 Recording Status Detailed Information Screen
Click this to start the operation of the recording function for a selected
recording setting.
Click this to stop the operation of the recording function for a selected
recording setting.
Click this to perform file saving of the recording function for a selected
recording setting.
Note that it is not performed if no data has never been accumulated and there
is no accumulated data of a sampled device and label.
In addition, data is not accumulated if a recording startup trigger has never
been satisfied when selecting "Recording Startup Trigger + File Saving
Trigger" for "Recording Method" in the saving period setting.
Accumulated data and the number of successful recording startup triggers can
be checked in the "Recording Status Detailed Information" screen.
Page 67 Recording Status Detailed Information Screen
*1
*2
4 RECORDING MONITOR
4
65