Mitsubishi Electric MELSEC iQ-R Series User Manual page 305

■Setting range for the mix control (when the inter-module simultaneous temperature rise
function is enabled) (only CH3 and CH4)
• 0: No simultaneous temperature rise
• 1: Group 1 selection
• 2: Group 2 selection
• 3: Group 3 selection
• 4: Group 4 selection
• 5: Group 5 selection
• 6: Group 6 selection
• 7: Group 7 selection
• 8: Group 8 selection
• 9: Group 9 selection
• 10: Group 10 selection
• 11: Group 11 selection
• 12: Group 12 selection
• 13: Group 13 selection
• 14: Group 14 selection
• 15: Group 15 selection
• 16: Group 16 selection
■Enabling the settings
Turn ON and OFF 'Setting change command' (YB) in the setting mode ('Setting/operation mode status' (X1): OFF) to enable
the settings.
■Default value
The default value is No simultaneous temperature rise (0).
APPX
Appendix 3 Buffer Memory Areas
A
303