When the initial setting has been configured for "Sensor Correction Value Setting" in "Application Setting," the
value set for "Sensor Correction Value Setting" in "Application Setting" is used instead of the correction value
determined in Step 9 by executing the following operations.
• Turning OFF and ON the power
• Resetting and clearing the reset of the CPU module
To use the correction value determined in Step 9 after the above operations are executed, correct the value
set for "Sensor Correction Value Setting" in "Application Setting" and write the value to the programmable
controller. Before correcting the value set for "Sensor Correction Value Setting," check the temporal operation
to be executed after the correction with the setting determined in Step 9.
10.
Click the [Yes] button.
11.
Click the [OK] button.
12.
Click the [Close] button.
13.
Click the [Yes] button.
14.
Click the [Yes] button.
1 FUNCTIONS
1.19 Sensor Correction Function
1
61