LG Styler S3RERB Service Engineering Manual page 12

Hide thumbs Also See for Styler S3RERB:
Table of Contents

Advertisement

The following clearances are recommended for
the Styler. Although the Styler has been tested
for clearances of 1
/
inch (3 cm) on the sides
3
16
and rear, recommended clearances should be
considered for the following reasons:
y Additional space should be considered for
ease of installation and servicing.
y Additional space might be required for
wall, door and floor moldings.
y Additional space should be considered
on all sides of the Styler to reduce noise
transfer.
y Additional laundry appliance spacing
should also be considered.
Installation Spacing for Recessed Area or Closet Installation
There should be at least a little space around the Styler (or any other appliance) to avoid contact with
walls, furniture, or other appliances during operation. Allow a minimum of 1
of the Styler to avoid increased noise or damage.
y For closet installation, with a door,
minimum ventilation openings in the
top and bottom of the door are required.
Louvered doors with equivalent ventilation
openings are acceptable.
Closet Ventilation Requirements
Closets with doors must have both an upper
and lower vent to prevent heat and moisture
buildup in the closet. One upper vent opening
with a minimum opening of 48 sq. in. (310 cm
must be installed no lower than 6 feet above the
floor. One lower vent opening with a minimum
opening of 24 sq. in. (155 cm
no more than one foot above the floor. One
example shown uses vent grilles in the door.
(7.6 cm)
(310 sq. cm)
24 sq. in.
(155 sq. cm)
(7.6 cm)
closet door vent
requirements
) must be installed
2
3"
in.
Vent
48 sq. in.
Vent
1850mm
in.
3"
445mm
2 in.
(5 cm)
y Minimum vent opening for built-in
installation is 31 ½ sq. in. (200 cm
Built-In Installation
Wall
18 in. (455mm)
)
2
73.8 in. (1,875 mm)
18 in. (455 mm)
19 in. (485 mm)
12
585mm
7 3/4 in.
(20 cm)
2 in.
(5 cm)
18 in. (46 cm)
in front
3
/
inch (3 cm) on all sides
16
).
2
10 in. (250mm)
15.75 in. (400 mm)
2 in. (50 mm)
2 in. (50 mm)
1 in. (25 mm)
1
3
/
in. (30 mm)
16
74.4 in. (1,890 mm)
24.8 in. (630 mm)
1
3
/
in. (30 mm)
16
Ceiling

Advertisement

Table of Contents
loading

Table of Contents