LG Styler S3RERB Service Engineering Manual page 92

12-26. Problem with Drying #3
•
Clothing is not completely dry after drying. Moisture remains on the clothing.
1. In the case of thick clothing such as jeans and blankets, run the Drying course once more after turning
the clothing inside out.
Thick clothing may not dry well due to its properties to keep moisture compared to the thin clothing.
Especially, when you dry thick clothing or stack up several thin clothing, outside of the clothing may
dry well, while the inside may not dry as well.
In this case, you can turn the clothing inside out and dry them once more for effective drying. In the
case of thick pants such as jeans, you may want to stretch the waist of the pants and hang them on the
hanger for improved drying performance.
2. Do not open the door during the
If you open the door during the cycle, performance of the Styler may decrease
and water may condense and fall on the floor as the warm, humid air inside
meets the cold air outside.
Even if you don't open the door during the operation, small amount of water
may condense and gather at the rubber gasket. This is a natural phenomenon
and not a malfunction. Wipe the inside of the Styler once after use or open the
door of the Styler to dry the moisture inside.
operation.
92