LG Styler S3RERB Service Engineering Manual page 24

OPENING AND CLOSING THE PANTS
HANGER
1 To open, fold the hook down
toward the
and separate the blades.
hook
hook
hanger
blades
hanger
blades
2 Once pants are inserted, bring the blades
together and rotate the hook up and away
from the blades to lock them in place.
Hanging Pants On the Pants Hanger
1 Remove all objects from pants pockets and
button the back pockets.
2 Fold pants along crease
lines (or where crease
lines would be), and
attach the pants hanger
at the ends of the pants
legs.
3 Tug gently on the sides of the pants legs.
Make sure pants are stretched tight within
the hanger, with no wrinkles, and will not
fall out of the hanger during the cycle.
4 Place the pants hanger on the moving
hanger or in the Pants Crease Care.
hook
hanger
blades
hanger blades to unlock
USING THE PANTS CREASE CARE
1 Open the Pants Crease Care by pressing on
the icon on the side.
2 Hang the pants hanger on the hook above
the Pants Crease Care that best fits the
length of the pants being pressed.
If the pants are longer, use the higher hooks
to keep the pants from hitting the floor of the
cabinet.
Pants should be no wider than 38 in. (96 cm)
or longer than 43.3 in. (110 cm). Check the
size of the pants before using the Pants
Crease Care. If pants are too large, use the
moving hanger.
3 Make sure the pants are
hanging straight.
Check the creases on the
legs to make sure they
are lined up. If the pants
are not folded properly at
the creases and hanging
straight, double lines may
appear at the pants' edges.
4 Close the Pants Crease
Care, then straighten the
pants once more.
Gently tug the edges
of the pants to smooth
out any wrinkles. Make
sure the pants are hang-
ing straight in the Pants
Crease Care.
24