Things To Check Before Servicing - LG Styler S3RERB Service Engineering Manual

9

Things to Check before Servicing

Symptoms
[Feed Water]
icon is
flickering.
[Discard Water]
flickering.
[Door Open]
icon is
flickering.
[AE]
is displayed.
Error
[LE]
is displayed.
Message
[LE2]
is displayed.
[E1]
is displayed.
[E4]
is displayed.
[TE1]
is displayed.
[TE2]
is displayed.
[TE3]
is displayed.
[TE5]
is displayed.
Smoke comes out whenever
the door is opened.
I fully filled the water supply
tank and used it once, but
there is no water in the tank.
When operating the product, I
hear the sound of a "snore".
The product moves left and
It is not
right when in operation.
a sign of
malfunc-
tion.
During the operation, I hear
the whirring sound.
During the operation, I hear
the revolving sound.
During the operation, I hear
the sounds of boiling and
steam release.
During the operation, I hear
the sound of running water.
Checkpoints
"Is there enough water in the water supply
tank?"
"Is the water supply tank in place?"
icon is " Isn't the water drain tank full of water?"
"Is the water drain tank in place?"
"Didn't you operate the product
without closing the door completely?"
"Do you hear the sound of wind?
"Do you hear the sound of wind?
"Do you hear the sound of wind?
"Isn't the steam generated properly?"
"Isn't the steam generated properly?"
"Doesn't Drying work properly?"
"Doesn't Drying work properly?"
SDSqDoesn't Drying work properly?SDSq
SDSqDoesn't Drying work properly?SDSq
"Did you open the door during the opera-
tion?"
"Did you operate the product for the first
time?"
"Did you hear the sound at the beginning
of the operation?"
"Did you put in wet clothes?"
"Did you hear the sound during the opera-
tion?"
"Did you hear the sound during the opera-
tion?"
"Did you hear the sound during the opera-
tion?"
"Did you hear the sound during the opera-
tion?"
Fill the water supply tank with water and put it
back into the product.
Put the water supply tank back into the product.
Empty the water drain tank.
Put the water drain tank back into the product.
Close the door tight.
After pulling out the power plug,
contact the service center
or its retail store.
It might be the steam generated due to the course
operation.
It is not a sign of malfunction.
Because there is no water stored in the product
when using the product for the first time, a large
amount of water is needed. From the second use,
the amount of water needed is reduced.
That is a sound of moving hanger balancing the level
before operation. It is not a sign of malfunction. If,
however, the noise gets worse, contact the service
center or its retail store.
Drying time may be lengthened for excessively wet
clothes. Dry the clothes before you put them in the
Styler. Drying time may be lengthened depending
on the wet states and volume of clothes. When dry-
ing is finished, the Styler will automatically stop.
That is a sound of the compressor running, just like
that of refrigerator, for the Drying process. It is not
a sign of malfunction. If, however, the noise gets
worse, contact the service center or its retail store.
That is a sound of the compressor running to do the
Drying. It is not a sign of malfunction. It is not a sign
of malfunction. If, however, the noise gets worse,
contact the service center or its retail store.
That is a sound of boiling water to make steam and
spraying the steam onto the clothes. It is not a sign
of malfunction. It is not a sign of malfunction. If, how-
ever, the noise gets worse, contact the service center
or its retail store.
That is a normal sound of filling water to make
steam. It is not a sign of malfunction. If, however, the
noise gets worse, contact the service center or its
retail store.
57
Instructions