LG Styler S3RERB Service Engineering Manual page 34

MAINTENANCE
REGULAR CLEANING
WarNiNg
To reduce the risk of fire, electric shock, or
injury to persons when using this appliance,
follow basic precautions, including the
following:
y Unplug the Styler before cleaning to
avoid the risk of electric shock. Failure
to follow this warning can cause serious
injury, fire, electrical shock, or death.
y Never use harsh chemicals, abrasive
cleaners, or solvents to clean the
Styler. They will damage the finish.
Cleaning the Interior and Exterior
Proper care of your Styler can extend its life.
1 Clean the inside and outside of the
machine with a damp cloth. Glass cleaner
can be used to clean the front glass panel,
but spray it on a cloth and wipe rather than
spraying it directly on the panel.
2 Buff the door dry with a clean, dry cloth to
prevent any water stains.
3 Allow the interior and exterior to dry
completely before plugging in and
operating the product.
cautioN
• Do not spray water directly on the
product.
• Do not use detergent, methylated spirits,
solvents, or any volatile liquids to clean
the exterior of the product.
• Never use steel wool or abrasive
cleansers; they can damage the surface.
• Keep sharp objects away from the
exterior of the product. The touch panel
may not work if damaged.
Cleaning the Lint Filter
Always remove the lint from the filter after every
cycle. See Checking the Lint Filter, page 22.
If the lint filter has become very dirty or clogged,
wash the lint filter in warm, soapy water and
allow to dry thoroughly before reinstalling.
• Never operate the Styler without the lint filter.
• Never operate the Styler with a wet lint filter.
Cleaning the Aroma Filter
For best results, wash the aroma filter using
hot water and dish soap. After cleaning, wipe
the filter with a clean cloth and allow it to dry
thoroughly before reinstalling it.
The aroma filter can also be cleaned in the top
rack of the dishwasher.
• Never operate the Styler without the aroma
filter.
• Never operate the Styler with a wet aroma
filter.
Cleaning the Water Tanks
The water in the water supply tank contacts the
clothing and items treated in the Styler directly.
Clean both tanks periodically and keep them clean
at all times. If the tanks are not properly cleaned,
they may start to smell or need to be replaced.
• Use only clean tap water in the supply tank
for best performance and to prolong the life
of the product. Do not use distilled water.
• Do not reuse the water from the water drain
tank in the water supply tank.
1 Clean the exterior of the tanks with a wet
cloth.
2 Use a cleaning brush or detergent made
exclusively for water tanks to clean the
inside of the water tanks.
These can be found online or at a local RV
and camping store.
34