Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 107

Hide thumbs Also See for SIMATIC HMI Unified Comfort MTP700:

Table of Contents

Backup file

● "File Name": Name of the backup. Select a name that best identifies the backup.

A backup includes multiple files. The master file has the extension ".brf". The number of

additional files varies; these files have the file name of the master file and a sequential

number (".0", ".1", ".2", etc.) as an extension.

● "Path": Destination path for the backup, storage medium and path are selected using the

"..." button.

● "Create backup": Button to start the backup process.

The HMI device restarts after the "Create backup" button is pressed.

The backup is started and a dialog with a progress bar is displayed for each backup file.

The HMI device is restarted again after the completion of the backup process.

The main window of the Control Panel is displayed after the restart.

The data of the HMI device are saved on the storage medium.

Note

Do not rename backup files on the data storage medium

If you change the name of the backup files on the data storage medium, these backup files

can no longer be loaded into the HMI device using the "Restore" function.

Leave the name of the backup files on the data storage medium unchanged.

Copy backup files completely

If you copy the backup files, be sure to also copy the master file ".brf" together with all

associated backup files (".0", ".1", ".2", etc.).

If one of the files is missing, the backup cannot be loaded.

Table of Contents