HMI devices with display diagonal ≤ 12"
Fasten the strain relief plate to the device with a torque of 0.8 Nm using the two screws
supplied.
The figure below shows the installation using the MTP700 Unified Comfort HMI device as an
example.
HMI devices with display diagonal ≥ 15"
Fasten the strain relief plate to the device with a torque of 0.8 Nm using the two screws
supplied.
The figure below shows the installation using the MTP1900 Unified Comfort HMI device as
an example.
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
Mounting and connecting the device
3.3 Installing a strain relief
39