Trace Forwarder; Apps - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

Operating the Control Panel

5.10 Apps

5.9.6

Trace forwarder

You specify whether or not trace outputs can be displayed under "Trace forwarder".
Trace forwarder
"Enable Trace forwarder": Option to enable or disable the "Tracing" function. The default
setting is "Disabled".
Enable "Tracing" for diagnostics and service purposes, e.g. to display trace outputs from
scripts. If you start the HMI device in maintenance mode, the "Tracing" function is
automatically enabled.
See also
FAQ on configuring Trace Viewer
(https://support.industry.siemens.com/cs/ww/en/view/109777593)
5.10 Apps
The following options are available for managing apps on the HMI device under "Apps":
● Install or uninstall SIMATIC Apps via "SIMATIC Edge" or change their settings.
● Start pre-installed Apps under "Add-ons" or change their settings.
● Uninstall and start pre-installed apps via the "App management" under "Settings" or
change their settings.
114
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA