Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 4

Preface
NOTICE
Manual belongs to the HMI device
This manual belongs to the HMI device and is also required for recommissioning. Store all
supplied and supplementary documentation for the entire service life of the HMI device.
Provide all stored documents to subsequent owners of the HMI device.
Trademarks
The following designations marked with the symbol ® are registered trademarks of
Siemens AG:
● HMI
● SIMATIC
● WinCC
Style conventions
Style Convention
"Add screen"
"File > Edit"
<F1>, <Alt+P>
Please observe notes labeled as follows:
Note
A note contains important information about the product described in the manual and its use,
or a specific section of the manual to which you should pay particular attention.
4
®
®
®
Scope
Terminology that appears in the user interface, for example, dialog box
•
names, tabs, buttons, menu commands
Required input, for example limit values, tag values
•
Path information
•
Operational sequences, for example, menu commands, shortcut menu
commands
Keyboard operation
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA