Table of Contents
Advertisement
Hardware Preparation and Installation
1
Installing Memory Modules, PMCs, and Drives
Warning
!
Caution
Mounting Memory Mezzanine Modules
1-10
Refer to
Antistatic Precautions on page 1-2
Dangerous voltages, capable of causing death, are present in this
equipment. Use extreme caution when handling, testing, and adjusting.
Avoid touching areas of integrated circuitry. Static discharge can damage
these circuits.
You can mount one or two 256MB memory mezzanine modules on the
CPN5365. Refer to
Antistatic Precautions on page 1-2
installation. Refer to
Figure 1-2
1. Attach three standoffs to the CPN5365 base board and secure with
three nuts on the secondary side of the board.
2. Place one memory mezzanine module on top of the three standoffs
and press gently on the center of the J16 connector, working
outward until the connectors are firmly seated.
3. Secure with three screws.
If mounting a second memory mezzanine module use a second set
of three standoffs instead of three screws.
4. Place the second memory mezzanine module on top of the three
standoffs and press onto the connector on the first memory
mezzanine module, making sure the connectors are firmly seated
together.
5. Secure with three screws.
before beginning installation.
for placement.
Computer Group Literature Center Web Site
before beginning
Advertisement
Table of Contents
