Indicator Led/Miscellaneous Connector; Table 2-19. Cptm-01 Drive Leds/Reset Connector (J2) - Motorola CompactPCI CPN5365 Installation And Use Manual

Table 2-18. CPTM-01 Floppy Connector (J9) (Continued)
Pin Signal Mnemonic
28 WPROT-
29 GND
30 RDATA-
31 GND
32 HDSEL-
33 GND
34 DSKCHG-

Indicator LED/Miscellaneous Connector

Table 2-19. CPTM-01 Drive LEDs/Reset Connector (J2)

Pin Signal Mnemonic
1 VCC
2 -
3 VCC
4 -
5 VCC
6 EIDE_LEDa
7 VCC
8 EIDE_LEDb
9 VCC
10 -
11 GND
12 PBRESET
13 GND
14 CSEL-
http://www.motorola.com/computer/literature
Signal Description
Indicates a disk is write protected
Drive Common
Raw read data from disk drive
Drive Common
Determines side of the floppy disk being accessed
Drive Common
Notifies the disk drive controller that the drive door is open
Signal Description
+5 Volt power
-
+5 Volt power
-
+5 Volt power
Secondary channel EIDE activity LED
+5 Volt power
Primary channel EIDE activity LED
+5 Volt power
-
Ground
Pushbutton reset
Ground
Tie this pin to ground to make the CompactFlash master
CPTM-01 Transition Module Connectors
2
2-23