Key Hardware Devices; Ecc800-Pro Core Controller; Product Configuration - Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description

8.3 Key Hardware Devices

8.3.1 ECC800-Pro Core Controller

8.3.1.1 Product Configuration

The ECC800-Pro data center controller is used to monitor the devices and environment in the
smart module. It consists of the power module and main control module. You can insert and
remove the power module.
You can configure the ECC800-Pro collector in the following two manners:
Configuration 1 (typical configuration): one power module and one main control module
Configuration 2: two power modules and one main control module.
Figure 8-11 ECC800-Pro collector in configuration 2
(1) Slot 1: power modules
Table 8-1 ECC800-Pro environmental specifications
Item
Working temperature
Storage temperature
Relative humidity
Altitude
Table 8-2 ECC800-Pro structural specifications
Item
Dimensions (L x W x H)
Weight
Issue 06 (2020-05-21)
 In configuration 1, install a filler panel in slot 2.
 In configuration 2, install power modules in slots 1 and 2.
Copyright © Huawei Technologies Co., Ltd.
(2) Slot 2: power modules
Specifications
–20° C to +50° C
–40° C to +70° C
5%–95% RH (non-condensing)
0–4000 m (When the altitude is between 3000 m and 4000 m,
the temperature decreases by 1° C for each additional 200 m.)
Specifications
442 mm × 330 mm × 43.6 mm
7.5 kg (dual power supplies + main control
8 Intelligent Module Management System
(3) Slot 3: main control module
144