Huawei FusionModule2000 Product Description page 181

FusionModule2000 Smart Modular Data Center
Product Description
Item
(Smoke sensor
test button)
E-label
Indicators
Table 8-39 Description of the indicators on the multi-functional sensor
Indicator
RUN
ALM
RF_Z
Issue 06 (2020-05-21)
Specifications
Hold down the button for 3s to trigger a smoke alarm, and release the
button to stop the smoke alarm.
Supported
Color Name
Green Module
running status
indicator
Red Alarm
indicator
Green Communicati
on status
indicator
Copyright © Huawei Technologies Co., Ltd.
8 Intelligent Module Management System
Status Description
Blinking at The multi-functional sensor
long successfully registers with
intervals
the ECC800-Pro and the
software runs properly (the
indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at The multi-functional sensor
short fails to register with the
intervals ECC800-Pro or the
communication fails (the
indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Blinking The indicator blinks at super
short intervals for 0.5s
(blinking at 10 Hz, on for
0.05s and then off for 0.05s)
and then turns off for 0.5s.
The cycle lasts for 10s.
Steady on A system failure alarm is
generated.
Off No system alarm is
generated.
Steady on No network parameters exist,
or a network is to be created.
Blinking at A network is set up, and no
long node access is allowed (the
intervals
indicator blinks at 0.5 Hz, on
for 1s and then off for 1s).
Blinking at A network is set up, and
super short node access is allowed (the
intervals indicator blinks at 10 Hz, on
for 0.05s and then off for
0.05s).
173