Huawei FusionModule2000 Product Description page 161

FusionModule2000 Smart Modular Data Center
Product Description
Indicator
RF_Z
SW Button
Table 8-15 SW button description
Function
Description
Wireless network
RF_Z (802.15.4)
pairing
Turning on WLAN
Restoring the
default IP address,
factory settings,
and user
information
Issue 06 (2020-05-21)
Color Name
indicator
Green Communic
ation status
indicator
Operation Description
In non-wireless network (802.15.4)
pairing mode, press and hold down the
button for 3s to 5s to enter the wireless
network pairing mode.
In wireless network (802.15.4) pairing
mode, press and hold down the button for
3s to 5s to exit the pairing mode; or the
system automatically exits the pairing
mode after 30 minutes without pressing
the button.
Press and hold down the button for more
than 8s to 20s to clear network
parameters.
Press the button for less than 3s to turn on
the WLAN service.
Hold down for 1 minute
Copyright © Huawei Technologies Co., Ltd.
8 Intelligent Module Management System
Status Description
generated.
Off The system is normal.
Blinking at A network is set up, and no node
long access is allowed (the indicator
intervals blinks at 0.5 Hz, on for 1s and
then off for 1s).
Blinking at A network is set up, and node
super short access is allowed (the indicator
intervals
blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
Indicator Status
The RF_Z indicator is
blinking at super short
intervals.
The RF_Z indicator is
blinking at long
intervals.
The RF_Z indicator is
blinking at super short
intervals.
None
None
153