Pad - Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description
Indicators and Buttons
Table 8-21 User interface indicators
Indicator
RUN
ALM
Table 8-22 Blinking description
Function
Description
Blinking

8.3.3 PAD

The pad allows the wireless access from the data center management system. You can monitor
the equipment in the data center and environmental parameters in real time over the APP.
Issue 06 (2020-05-21)
Status
Steady on
Off
Blinking at long
intervals
Blinking at short
intervals
Blinking
Steady on
Steady off
Instructions
Press the button for 1s
Copyright © Huawei Technologies Co., Ltd.
8 Intelligent Module Management System
Status Description
A board application is being loaded.
The board is not running.
The ECC800-Pro is successfully registered, and the
software runs properly (blinking at long intervals
(0.5 Hz), on for 1s and then off for 1s).
The communication is interrupted or the
ECC800-Pro is unsuccessfully registered (blinking
at short intervals (2.5 Hz), on for 0.2s and then off
for 0.2s).
Blinking at super short intervals for 0.5s and then
off for 0.5s; last 10s (blinking at super short
intervals: 10 Hz, on for 0.05s and then off for
0.05s)
A system fault alarm is raised.
The system is normal.
Indicator Status
The RUN indicator blinks at super short
intervals (10 Hz), on for 0.05s and off for
0.05s, and lasts for 10s.
158