Panasonic KX-TD816 Programming Manual page 101

12.
Press END.
Conditions
• To programme another unit, start from step 1.
• For the KX-TD1232, the unit numbers 1 through 3 are for the Master System and 4 through
6 are for the Slave System, and jack numbers 01 through 32 are for Master System and 33
through 64 are for Slave System.
• For the KX-TD1232, single line telephone jacks connected to the KX-TD194 must belong
to the same system as the data port assigned in programme [154].
For example, if the assigned data port is one of the extension jacks in the master system, the
KX-TD194 must be connected to jacks 01 through 32.
On the other hand, if the assigned data port is one of the extension jacks in the slave system,
the KX-TD194 must be connected to jacks 33 through 64.
Programming example for the KX-TD1232
Unit 1
Data port = jack 02
MW port 1 = single line telephone jack 01-2
MW port 3 = single line telephone jack 05-2
Unit 4
Data port = jack 33
MW port 2 = single line telephone jack 34-2
MW port 6 = single line telephone jack 35-1
• A single line telephone jack cannot be assigned to more than one unit.
Features Guide References
Message Waiting
General Programming
2.2 System Programming
101