[120] Charge Display Selection
Description
Assigns the initial display format of charge fee.
Selection
in Meter / in Charge
Default
in Meter
Programming
1.
Enter 120.
Display: Charge Meter
2.
Press NEXT.
Display example: in Meter
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
• This programming is only effective when you select for charge (SMDR Output) by
programme [ 815]SMDR Output Mode.
• This programming will also determine the print-out format of the charge fee reference.
Features Guide References
Charge Fee Reference
Display Message
Station Message Detail Recording (SMDR)
General Programming
2.2 System Programming
83