Ps Incoming Call Display - Panasonic KX-TD816 Programming Manual

5.3 Extension Programming
[676] P S Incoming Call Display
Description
Allows you to select between three display types when an incoming call is received.
Calling: The incoming caller's telephone number is displayed.
Called: The called telephone number is displayed.
Line Name: The outside line name assigned in the [417] programme is displayed.
Selection
• PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• Display Types: Calling / Called / Line Name
Default
All PSs – Calling
Programming
1.
Enter 676.
Display: PS Incoming Disp
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registration numbe .
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:Calling
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration numbe .
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all PSs to one selection, press the key in step 3. In this case, the display shows
the contents programmed for the PS which has the lowest PS registration number.
• If the receiving call is in the 1:N status, the display only shows outside line number.
378 DECT Programming