[15 0]Ddi Translation Table - Panasonic KX-TD816 Programming Manual

3.2 System Programming
[150] D DI Translation Table
Description
Assigns a destination location of incoming Direct Dialling In (DDI) numbers.
Incoming DDI numbers are received at extensions assigned to each location number.
Selection
• Location number: 000 through 399
• DDI number: 16 digits max.
Default
All locations – Not stored
Programming
1.
Enter 150.
Display: DDI Assign
2.
Press NEXT.
Display: Location NO?
3.
Enter a location numbe .
To enter location number 000, you can also press NEXT.
Display example: 000:Not Stored
4.
Enter a DDI numbe .
To delete the current entry, press CLEA .
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another location number, press NEXT or PREV, or SELECT and the
desired location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• The DDI number can be a maximum of 16 digits, consisting of 0 through 9.
• Programmes [151-152 ]DDI Ringing Assignment – Day / Night are used to assign an
extension to each location number in the day and night modes.
• To assign a destination location of incoming DDI numbers, select "DDI" in programme
[452-4 53]ISDN Ring Service Assignment – Day / Night first.
244 ISDN Programming