[014] Budget Management on ISDN Port
Description
Assigns the charge limitation of a call on the ISDN extension port basis.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Charge limitation (Charge): 0 through 59999
Default
All ports – 0
Programming
1.
Enter 014.
Display: ISDN Charge Lim.
2.
Press NEXT.
Display: Port NO?
3.
Enter a port numbe .
To enter port number 01, you can also press NEXT.
Display example: #01: 0
4.
Enter a charge limitation.
To delete the charge limitation, press CLEAR.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
numbe .
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• If the charge limitation is set "0", no restriction is applied.
• To assign all ports to one selection, press the
In this case, the display shows the contents programmed for port 01.
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
ISDN Programming
3.1 Manager Programming
key in step 3.
235