Panasonic KX-TD816 Programming Manual page 78

2.2 System Programming
KX-TD123
1.
Enter 117.
Display: VMS Port Asn
2.
Press NEXT to programme the Master System.
To programme the Slave System, press NEXT again.
Display example: Mast1:# # # #
3.
Enter a jack numbe .
To delete the current entry, press CLEA .
To change the current entry, press CLEAR and enter the new jack number.
4.
Press to enter another jack number.
5.
Repeat steps 3 through 4 to enter another jack number.
6.
Press STORE.
7.
Press NEXT to programme the Slave System.
Display example: Slav1:# # # #
8.
Repeat steps 3 through 4 to enter another jack number.
9.
Press STORE.
10.
Press END.
Conditions
• Neither jack number 01 nor the manager extension can be assigned as a voice mail port jack.
• The jack numbers correspond to the voice mail port in numerical order.
<Example> Stored jack numbers: Jacks 02, 03, 05, 08
Jack 02=Voice mail numbers 01, 02; Jack 03=Voice mail numbers 03, 04;
Jack 05=Voice mail numbers 05, 06; Jack 08=Voice mail numbers 07, 08
Features Guide References
Voice Mail Integration for Digital Proprietary Telephones
78 General Programming